Blog
/
Chess Sets

How to choose a chess set: sizes, materials and the Staunton pattern

How to choose a chess set: FIDE asks for a 95 mm king on squares of 5 to 6 cm, and a base covering 75 to 80 percent of the square.

FERZ Club
·
November 22, 2026

Guests in black tie lean over a wooden folding board mid-game at a FERZ chess night, glasses and a red rose on the table.

Key facts

  • FIDE's equipment standard, in force since 1 March 2026, sets a king of 95 mm, a queen of 85 mm, a bishop of 70 mm, a knight of 60 mm, a rook of 55 mm and a pawn of 50 mm, with up to 10 percent variance (FIDE Handbook C.02).
  • FIDE asks for squares of 5 to 6 cm and a base diameter of 40 to 50 percent of each piece's height (FIDE Handbook C.02).
  • The king's base should cover roughly 75 to 80 percent of the square: the standard US Chess set pairs a 3.75 inch king and a 1.75 inch base with 2.25 inch squares, a ratio of 77 percent (Chess.com).
  • Pieces must stay upright at a tilt of about 30 degrees, and four pawns must fit comfortably on one square (FIDE Handbook C.02).
  • The 1849 Staunton-pattern set in the British Museum, from the design Nathaniel Cook registered on 1 March 1849, has a king of 8.5 cm, a full centimetre shorter than today's standard (British Museum, 2004,1214.1.a-hh).

How to choose a chess set comes down to two measurements and one ratio. FIDE's equipment standard, in force since 1 March 2026, asks for a king of 95 mm on squares of 5 to 6 cm, and the base of that king should cover roughly 75 to 80 percent of the square it stands on. Get those right and almost any set plays well. Get them wrong and an expensive board is a nuisance for the rest of its life. This guide covers the numbers, the tests you can run with your hands, the materials, the board formats, what the words on a product page mean, and how to keep wood alive in a climate like this one.

If you are shopping at the top of the market, the materials, makers and auction records are in our guide to luxury chess sets. This one is about fit.

What to decide before you choose a chess set

A set has a job. The job decides the size, and the size decides nearly everything else.

A set for a dining table or a study gets used in company, often with glasses on the same surface, and wants pieces heavy enough not to drift when someone leans. A set for serious play wants the tournament proportions below and nothing else. A set for a bag wants to survive being sat on. A set for a shelf is a different purchase altogether, and the usual mistake is buying one and then trying to play on it.

Decide which of those you are buying before you look at a single photograph. Most regret in this category comes from buying a display set and expecting it to behave like a playing set.

The numbers FIDE sets for board and pieces

The current standard is chapter C.02 of the FIDE Handbook, approved by the FIDE Council and applied from 1 March 2026. FIDE confirmed the date publicly in March 2026. The figures are short enough to memorise.

Standard piece heights, with up to 10 percent variance allowed as long as the order stays King above Queen above Bishop above Knight above Rook above Pawn:

| Piece | Height | |---|---| | King | 95 mm | | Queen | 85 mm | | Bishop | 70 mm | | Knight | 60 mm | | Rook | 55 mm | | Pawn | 50 mm |

Each square should measure between 5 and 6 cm per side, and every square the same. The base diameter of each piece should be 40 to 50 percent of its total height. Four pawns must fit comfortably on a single square. Pieces must stay standing at a tilt of about 30 degrees, and both pieces and board must carry felt or another silent, skid-proof material underneath.

Two more requirements are easy to overlook and immediately obvious once you own a set that ignores them. Everything must be recognisable from about two metres: that is the distance between you and the far side of the board when you sit back. And the finish on both pieces and board must be matte or otherwise non-reflective, because a glossy board throws the lamp straight back at the player.

For boards, FIDE asks for rigid, perfectly flat construction in natural wood, naming birch, maple or European ash combined with walnut, teak or beech, with a surface that resists a brief spill. That last line is written for tournament halls and applies just as well to a table where drinks are being poured.

Masked guests stand around a wooden board with a digital clock at a FERZ chess night in Dubai
Masked guests stand around a wooden board with a digital clock at a FERZ chess night in Dubai

The one ratio that decides whether a set plays well

Height is the number everyone quotes. The ratio between the king's base and the square is the number that decides whether the set is pleasant.

Chess.com's guide to board dimensions puts it plainly: the base diameter should be roughly 75 to 80 percent of the square size. The standard US Chess tournament set lands at 77 percent, with a king of 3.75 inches, a base of 1.75 inches and squares of 2.25 inches. US Chess allows squares from 2 to 2.5 inches and kings from 3.375 to 4.5 inches, which is a wider window than FIDE's.

Outside that band the board stops working. At 93 percent the king nearly fills its square, neighbours touch, and pieces go over every time someone reaches across. At 58 percent the pieces rattle around like models on a map and the position is harder to read at a glance, not easier.

This is also why buying a board and a set of pieces separately is a real decision and not a stylistic one. If you do it, carry one number with you: the king's base diameter. Divide it by the square size. If the answer sits between 0.75 and 0.8, you are fine.

Three tests you can run in thirty seconds

None of this needs a ruler once the set is in front of you.

  1. The four-pawn test. Stand four pawns on one square. They should sit there comfortably. This is FIDE's own wording and the quickest proof that the set is not overcrowded.
  2. The gap test. Put a king and a queen on squares touching at a corner, then try to pass a third piece between them without anything touching. If it goes through cleanly, the spacing is right.
  3. The tilt test. Push a piece gently to about thirty degrees and let go. It should come back. A piece that topples is either badly weighted or top-heavy, and it will fall over in blitz for the rest of its life.

Add a fourth test of your own: sit back in your chair and look at the board from where you will actually sit. If you cannot tell a bishop from a pawn at two metres, neither will your opponent.

Materials: what to choose a chess set from

FIDE allows wood, plastic, or materials closely imitating them, with light pieces in white, cream or another pale shade and dark pieces in brown, black or a natural wood tone such as maple or walnut. The contrast has to be clear to a colour-blind player.

That is more permissive than most buyers expect, and the honest reading of it is this: a good plastic tournament set plays better than a mediocre wooden one. Weighted plastic in the standard size is what most serious players actually use, because it is cheap, it is indestructible, and the proportions are reliably correct.

Wood is what you want on a table where people are sitting with a drink. Boxwood, the pale dense wood of the classic sets, ages well and carves cleanly; it is usually paired with a stained or genuinely dark wood for the second colour. Boards add maple, walnut and burl for the squares. The one word to read carefully on a label is "ebonized", which means a pale wood stained black rather than ebony itself.

Glass, stone and metal sets photograph beautifully and play badly. They are reflective by nature, which is exactly what the standard rules out, and they are usually unweighted. Buy them for a shelf with your eyes open.

Board formats: folding, roll-up, solid and travel

The format matters more than the price for most households.

A folding wooden board is the compromise that wins most often: it closes around the pieces, stores on a bookshelf, and sets up in seconds. The visible hinge line down the middle is the price, and it bothers some people permanently.

A roll-up vinyl board is the standard of club and tournament play everywhere. It weighs nothing, costs almost nothing, has correct 2.25 inch squares, and is the right partner for a weighted plastic set. It will not impress anyone at a dinner table.

A solid wooden board is the one to own if the board stays out. It is heavy, it has no seam, and it sits flat without argument. Check it on a flat surface before you commit: FIDE's word is "perfectly planar", and a warped board never recovers.

A travel set is a separate purchase, not a compromise on the main one. Magnetic pieces on a small folding board survive a bag and a moving car. Nobody should try to play a long game on one.

Guests of all ages watch a game on a wooden folding board at a FERZ chess night
Guests of all ages watch a game on a wooden folding board at a FERZ chess night

What FIDE approved actually means on a product page

The phrase appears on a great many listings and it has a specific meaning, set out in the general regulations that accompany the equipment standard.

There are three levels. A Self-Declaration of Product Compliance is the manufacturer signing a form to say its product meets the standard. A Technical Acceptance of Product Compliance is a review by FIDE's Technical Commission before consent is granted. A FIDE Endorsement of Accepted Product means the manufacturer has an accepted product and a commercial agreement with FIDE, and FIDE publicly supports it. The Technical Commission holds the authority to decide whether any given piece of equipment is appropriate for official competition, and manufacturers pay a testing fee.

In practice none of this matters unless you are supplying a FIDE-rated tournament. For a set at home, the measurements above tell you everything the certificate would. Treat "FIDE approved" on a listing as a claim about size, and check the size.

The Staunton pattern, and why the original was smaller

Every piece described above is a Staunton piece. The pattern is the reason a bishop looks like a bishop in Dubai, Reykjavik and Buenos Aires, and FIDE still names it as the style pieces should follow.

The design was registered by Nathaniel Cook on 1 March 1849, and by 29 September that year sets of it were being sold by John Jaques of London, Cook's brother-in-law. Howard Staunton, the strongest player of the day, was persuaded to endorse the pieces, and his name stuck to a design he did not draw.

One of those early sets sits in the British Museum, carved and turned ivory in its original papier mache box. Its measurements are worth knowing before you decide that bigger is better: the white king is 8.5 cm, the queen 6.8 cm, the bishop 6 cm, the knight 5.3 cm and the pawn 4.2 cm. The set that founded the standard was a full centimetre shorter in the king than the standard it founded. Scale followed the game into tournament halls, not the other way round.

Keeping a wooden chess set alive in a hot climate

Wood moves. It is the one thing a buying guide usually leaves out, and in a city of air-conditioned rooms and humid streets it is the thing that actually damages sets.

The conservation guidance is consistent. The Western Australian Museum's manual asks for 15 to 25 degrees Celsius and 40 to 60 percent relative humidity, with changes held to 4 degrees and 5 percent in any 24-hour period. Hot dry conditions make wood shrink and crack; excessively moist conditions make it swell and warp. The same guidance is blunt about light: never leave wooden objects in direct sunlight, because veneers and glues lift, warp and crack.

Translated for a flat in Dubai: keep the board off the windowsill and out of the path of an air-conditioning vent, and do not move it straight from a cold room to a terrace. Sudden change does the damage, not the average.

What we put on the tables at a FERZ night

FERZ is a social and chess club, and the sets at our nights have to pass a harder test than a tournament set does. They sit on low tables in bars and private villas, next to glasses, under warm light, with people leaning in to watch. That rules out glossy boards, light pieces and anything that falls over when the table is bumped.

The boards made by Nastya Bers are the ones we use and the ones members receive: handmade, in the club's red and white, and built for a table with people around it rather than a tournament hall. They are in the FERZ shop, and the wider case for spending real money on a board is in our luxury chess sets guide. If you would rather test a few sets before buying one, the simplest way is to play on them: our guide to chess in Dubai covers where the city plays.

A checklist for choosing a chess set

  1. Name the job first: table, serious play, travel or display. Do not buy one set for two of them.
  2. Measure the king's base and the square, and keep the ratio between 0.75 and 0.8.
  3. Check the piece heights against the FIDE table, allowing the 10 percent variance.
  4. Run the four-pawn test, the gap test and the tilt test before you pay.
  5. Refuse a glossy finish on the board or the pieces, and refuse pieces you cannot read at two metres.
  6. Feel for felt under every base, and check the board sits flat on a flat surface.
  7. Match the format to where it will live: folding to store, roll-up for clubs, solid if it stays out.
  8. Keep it between 40 and 60 percent humidity, out of sunlight and away from the air-conditioning.

Membership

FERZ membership: 15+ nights a year and a handmade board

Learn more

Sources

FERZ Events

All events
Players at candlelit tables at a FERZ Chess Night in a Dubai speakeasy bar

Chess Nights

Restaurants and speakeasy bars

A grandmaster plays a candlelit simul at a FERZ Premier Chess Night

Premier Chess Nights

Grandmasters, private villas

Masked members watch a game at a members-only FERZ evening in a private villa

Members only

Yachts and villas

More from the blog

Collaborations & private events

chess. art. talk.

Open to collaborations with brands, venues and companies: private chess nights, partner events and evenings with grandmasters.

For BrandsEventsShopMembershipGift VouchersAboutBlog